LM675 Datasheet | Texas Instruments

FEATURES - 2 3A Current Capability - AVO Typically 90 d B - 5.5 MHz Gain Bandwidth Product - 8 V/μs Slew Rate - Wide Power Bandwidth 70 k Hz - 1 m V Typical Offset Voltage - Short Circuit Protection - Thermal Protection with Parole Circuit (100% Tested) - 16V- 60V Supply Range - Wide mon Mode Range - Internal Output Protection Diodes - 90 d B Ripple Rejection - Plastic Power Package TO-220 Connection Diagram - The tab is internally connected to pin 3 (- VEE) Figure 1. Front View TO-220 Power Package (NDH) See Package Number NDH0005D Typical Applications APPLICATIONS - High Performance Power Op Amp - Bridge Amplifiers - Motor Speed Controls - Servo Amplifiers - Instrument Systems DESCRIPTION The LM675 is a monolithic power operational amplifier featuring wide bandwidth and low input offset voltage, making it equally suitable for AC and DC applications. The LM675 is capable of delivering output currents in excess of 3 amps, operating at supply voltages of up to 60V. The device overload protection consists of both internal current limiting and thermal shutdown. The amplifier is also internally pensated for gains of 10 or greater. Figure 2. Non-Inverting Amplifier Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1999- 2013, Texas Instruments Incorporated SNOSBP3E - MAY 1999 - REVISED MARCH 2013 .ti. These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic...